Timz MESH Info Page

 Return to Main Ham Page 

Link to the MVMA website

 

Do you live in the Dayton Ohio area ???

Click Here for equipment suggestions

 

 

A common mistake - and it's not a technical one

What I've Learned So Far 

Equipment List -and how I Mounted the Ubiquity

Help with communicating to a brand new Ubiqutit Device, for reflash

Grandstream 1600 series and 3240 VoIP Phone Setup

How-To Connect a BasicTalk VOIP ATA Adapter

5.8ghz Sectoral Array

Can't connect ? Check These 3 Things

Screen Shot of our local Mesh Grids Status page

Ubiquiti - Special Handling for first time reflash

Ubiquiti AirRouter HP external power hookup

NAS installation (how to add HTML "web" pages to your node)

My PTZ Tower Cam

How to resurrect a dead Ubiquiti from a corrupted flash

 

My Mesh Nodes:

The Bellbrook 2.4ghz node is located in Sugarcreek Twp, near Bellbrook Ohio
mounted 72' up on my home tower. Grid EM79xp Ground elevation here is 980'

Click here for a map showing this nodes location

 The Xenia South 2.4ghz node is located in Xenia Twp on Rt. 380, just south of Rt. 35
On a 60' tower owned by W S Electronics:

Grid EM89ap, ground elevation 1005'

Click here for a map showing this nodes location

The Beavercreek 2.4ghz is located on the N8DCP 65' tower; grid EM79xr. Ground elevation 970'
near N.Fairfield Rd at Pebble Creek Dr./Suburban Dr. area. Thanks to David N8DCP for allowing access to his tower.

Click here for a map showing this nodes location 

The Xenia North 2.4ghz "Simpson" node is located 90' up on a 100' ham tower, owned by Jim Simpson WB8QZZ

Grid EM89aq, Ground elevation 920'

a BIG THANKS to Jim for allowing us access to his mega tower. He is located in north Xenia, a couple of blocksNE of the Greene County Fairgrounds.

At the base of the tower is a convenient weather-proof box, which already had 120vac power:

The POE (power injector) for the Bullet is located there. No part of the node runs to his house.

Click here for a map showing this nodes location

 

What I've Learned So Far 

Screen Shot of our local Mesh Grids Status page

Ubiquiti - Special Handling for first time reflash

Ubiquiti AirRouter HP external power hookup

Grandstream 1600 series and 3240 VoIP Phone Setup

NAS installation (how to add HTML "web" pages to your node)

Equipment List -and how I Mounted the Ubiquity

Help with communicating to a brand new Ubiqutit Device, for reflash

5.8ghz Sectoral Array

My PTZ Tower Cam

How-To Connect a BasicTalk VOIP ATA Adapter

How to resurrect a dead Ubiquiti from a corrupted flash

 

a BIG THANK-YOU to Bill WA8APB for all his help and knowledge.

email Tim