Timz Mesh Page
 Return to Main Mesh Page

 

Remember that your PC/Laptop can not have access to the internet while trying to connect to your node.
If your PC has WiFi connection to the internet.... disable Wifi .
Likewise... if your PC generally reaches the internet via ethernet cable; unplug that cable, and plug your nodes ethernet cable in its place.

After reflashing the firmware... type this URL into your browser:

http://localnode:8080

 

Three Things to Check

if you are not connecting - but should be...

 

These three Setup fields must match the other nodes in your area or

you won't be able to access them via RF...

 

 

I can't tell you what to put in here, as it will vary depending on how your local Mesh grid is configured.

Here are the settings in our area (SW Ohio) for 2.4ghz, but yours may differ:

If you do make changes, remember to click on "Save Changes" at the top, give it a chance to actually complete the save (can take 10 seconds or so), and then reboot your node.

 

 Return to Main Mesh Page
email Tim