Timz

DMR Repeater

return to DMR page , return to Radios page , helpful tools

Link to TYT Program Software Download

 

TYT MD-380 UHF single band
for the dual band UV version... click HERE

Left/Right Click HERE (save as) to download a beginning codeplug that will get you on the air fast (if given a choice, do not save this as a text file).

This is a basic program file with all the digital groups used on Timz DMR repeater, amd local analog repeaters as well. There are just two zones, Analog and Timz DMR digital.

 

After download, load the file into your Tytera program and make the following changes before burning your radio:

1. Click on General Setting

2. In the upper right part of this box, type in your call sign in the Radio Name field

3. Underneath this, enter in your DMR ID number in the Radio ID box

note: you will need a digital radio ID; it's easy & free. click: https://www.radioid.net/#!
click the box near the bottom of the page:
"I AGREE TO THE ABOVE TERMS AND CONDITIONS", and then click
"Register Account"

4. Save this file under a new name to your computer

5. Then send (upload) the file to the radio.

 

Note: the "OK to Transmit" beep is enabled when operating in digital mode

 

Button configuration when using the above codeplug file:

 

NOTE: to import a digital contact list...... click HERE

 

 

click HERE to see the registration & activity for the N8NQH DMR repeater on Brandmeister 

click HERE for handy DMR Toolz to make your DMR experience better

Click HERE to visit the ARES Ohio Section DMR Radio page

click HERE to read info on basic DMR repeater operational procedures

click HERE for radio codeplugs already configured 

click HERE for indepth details about the groups

 Contact Repeater Administrators

Timz

DMR Repeater

BACK